VL - Inclinometer

(BSH 4543/001/6013006/16)

The VL-Inclinometer is a digital roll sensor for the Installation on vessels. The power supply and the serial interfaces are galvanic isolated.

The system fulfills the following standards:
  - ISO/PAS 19697:2014              
  - ISO/DIS 19697                     
  - IEC60945
  - IEC61162-2
  - IEC61162-450

The measured results are transmitted as NMEA through two serial Interfaces (RS422). The device sends the following standard telegrams: $--HRM, $--XDR and  $--ALR. The status is indicated by three LED's.

Main features

Operating voltage 24V (18-32V) max. 250mA
Interface 1 1 x NMEA 38400 Baud, IEC61162-2
  telegrams according to IEC61162-1, ISO/DIS 19697
  receiver and transmitter galvanic isolated
Interface 2 1 x NMEA 38400 Baud, IEC61162-2
  telegrams according to IEC61162-1, ISO/DIS 19697
  receiver and transmitter galvanic isolated
Configuration Interface 1, proprietary NMEA sentences
System functionality Self-test of the module with status display after
  startup by the status LED:
  - Warning treshold has been exceeded
  - System malfunction of the sensor
Dimensions approx. 128mm x 88mm x 47mm
Application roll sensor
Storage temperature -40 up to 85 °C
Operating temperature -15 up to 55°C
Humidity Max. 90% not condensing
Angle measure accuracy ±5% or 1°according ISO/DIS 19697
Angle measure range ±90° according ISO/DIS 19697
Oscillating period (MG) ±1s, ISO/DIS 19697
Oscillating period (MB) 4 ÷ 40s, ISO/DIS 19697
Weight Sensor: 487g
  Display: 3kg
Article No. S0229