DCU5 - Data Control Unit

DCU5 is a modular data system for the acquisition of digital and analog signals. It is primarily used for the installation of Voyage Data Recorder (VDR) to receive signals from various sensors and send NMEA - telegram to the VDR.

MCU5 
Article No.

Main Control Unit
D0101 

9-32VDC power supply integrated
NMEA 0183 output RS422
Optional – RJ45 Ethernet interface

ADRM_8
Article No.
Address Module
D0100
for configuration of the dependent address
of each DCU by hardware
DIM_8 
Article No.
Digital Input Module 
D0102
8 galvanic isolated Inputs
dry contact or 24VDC input contact
each input independent selectable by jumper
DIM_8N
Article No.
Digital Input Module
D0122
8 inputs for Namur signals
up to 120Hz repetition rate
low voltage inputs detection
DOM230_4
Article No.
Digital Output Module
D0104 
4 channel galvanic isolated relays Outputs
up to 230VAC and 3A
DOMOC_8
Article No.
Digital Output Module
D0114
8 channel opto-coupler Outputs
up to 60VDC and 0,75A
DIMPT2_1
Article No.
Temperature Input Module
D0107
1 channel PT100, four wire temperature Input
2 channel digital input dry contact or 24VDC  
Input contact independent selectable by jumper
AIM10_8P
Article No.
Analog Input Module
D0133
8 channel input module with 10Bit Resolution
wire break detection and potentiometer reading
AIM10_8N
Article No.
Analog Input Module
D0134
similar to AIM10_8P
additionally designed for Namur contacts
with up to 60Hz repetition rate
AIM12_2
Article No.
Analog Input Module
D0113 
2 galvanic isolated inputs with 12Bit Resolution
+/-10V, 0-20mA
measures range selectable by jumper
AIM12_2-40
Article No.
Analog Input Module
D0118
2 galvanic isolated inputs with
12Bit resolution, +/- 40V
AIM12_8
Article No.

Analog Input Module
D0123

8 channel input module with 12Bit
synchron resolution and potentiometer
reading
AOM12_1
Article No.
Analog Output Module
D0110
1 galvanic isolated output with
12Bit resolution; +/-10V, 0-20mA, 0-10V,
+/-5V and 4-20mA; output signal Independent
selectable by jumper
AOM_AMP
Article No.
Voltage Buffer
D0121
+/- 10V input for 1:1 output / 0,6A
AOM_AMP_40
Article No.
Voltage Amplifier
D0119
+/- 10V input for 1:4 output / 10mA
REED_EXT
Article No.
REED contact
D0115
galvanic isolated reed relay contact
PS8.2 
Article No.
8,2V Power Supply
D0116
Power supply for NAMUR interfaces
DKM 
Article No.
Display-Keyboard Module
D0120
Display interface for 7-segment LED-
Display, 8Bit LCD-Display and PWM
for dimming; 4x4 Keymatrix
MCM2405
Article No.
Motor Control Module
D0140
PWM Controller for 24VDC motors,
analog inputs for joystick and Feedback unit