VL-BRC08 - Baud rates converter
The baud rates converter is a software version based on the successfully type approved IEC 60945 MCU5 hardware. The basic function of the system is receiving of NMEA telegrams with an adjustable baud rate from 4800 bps up to 38400 bps 8N1 and sending of these telegrams with a separately adjustable baud rate from 4800 bps up to 115200 8N1. With an additional parameter also the output frequency is alterable.
Main features:
| Dimensions | 110mm x 42mm x 55mm (length x width x height) |
| Microcontroller | P89V664FA Kbyte Flash Rom and 2 Kbyte SRAM on Chip, Watchdog |
| 1x full duplex UART | |
| Power supply | UB = +9...32V / Pv approx. 2,4 W; |
| inverse-polarity protection and self-healing fuse 1,5A | |
| Plug connector | Wago clamp-connections |
| Connections up to 2,5mm² | |
| Communication | 1x RS 422 galvanic isolated |
| Additional features | With jumper´s following modifications and situations are possible: RS 422 mode or RS 485 mode; bus termination on module, reset, parameter input and firmware update |
print